Performance Water Meter Econo
Built for Accuracy and Longevity
Performance Water Meter Econo 2 (PM) water meters are available in the following sizes:
- 5/8” (DN 15mm)
- ¾” (DN 20mm)
- 1” (DN 25mm)
- 1 1/2” (DN40mm)
- 2” (DN 50mm)
This meter is designed with a top load, that is, the parts are installed through the top of the water meter. This makes it much easier to repair or for maintenance of the water meter without removing the meter from the pipe line.
There is not much difference with the Econo 2 and the Nitro 1 except that in larger sizes from 1” to 2”, the multi-jet meters weigh slightly more. As far as flow rates and working pressure, they both display similar consistent performances.
The main case of the water meter is available in bronze and the measuring chamber is made of synthetic polymer.
The ¾” x 1” (PM05) has a maximum working pressure of 150 P.S.I., and a extreme high flow rate (intermittent) of 32 USGPM. In addition, it has a starting flow of 5/64 USGPM and a high flow rate of 30 USGPM.
If you decide on the Performance Meter Econo, then take advantage of the many accessories that can be purchased to fit it.
You can contact firstname.lastname@example.org or email@example.com for information on prices and meter specifications
Return from Performance Water Meter Econo to Homepage!
Return from Econo to Performance Meter main page!